What should be paid attention to when using diamond saw blade?
1. Adjust the travel switch according to the length, width and height of the waste material to make the saw blade lifting and the travel of the charging car within the reliable and effective range. Before sawing, the cutting edge of the saw blade shall be 10-20mm away from the waste material. After sawing, there should be 20-40mm left between the cutting edge and the bottom of the waste material. Before the saw blade moves left and right, all the saw blades should be pulled out of the waste material cutting edge. The distance should not be less than 150-200mm to prevent the saw blade from hitting the waste material.
2. In case of any shaking of the waste materials during cutting, the cutting shall be stopped immediately, and the work can be continued after the waste materials are firmly fixed. During cutting, the waste materials shall not be moved arbitrarily.