Three ways to improve the service life of saw blade
As we all know, the service life of diamond saw blade is always the focus of consumables in stone factory. A good diamond saw blade can not only improve the cutting effect, but also extend the service life of the saw blade, improve the cutting efficiency, and save the expense of consumables if we pay attention to the maintenance and use method. What should we pay attention to in the daily use and maintenance How to prolong the service life of diamond saw blade?
To extend the service life of the saw blade, the following points should be noted:
1. Use the cutter head with the same specification
In the production process, try to use new abrasives, so as to ensure that the size of the blade can be the same as much as possible, the same size of the cutting head is more stable, the rotation of the saw blade is more stable, and the consumption of each blade on the saw blade will be more uniform. Therefore, the same size of the cutter head can extend the service life of the saw blade. Of course, this is what we Yintian need to do, and we do. As the user of the saw blade, what you need to do is try to use the same saw blade to perform the same cutting task as much as possible, such as cutting 800 * 800mm British brown. Please do not change the saw blade at will unless absolutely necessary.
2. Maintain the saw blade
When we buy diamond saw blade, we must pay attention to protect the saw blade. It must not be handled and replayed lightly. This will cause the saw blade to deform and swing when cutting, so it will affect the life of the saw blade.
3. Ensure that the advancing speed of stone slab is stable
When our saw blade is in the cutting process, if it is an automatic cutting machine, the speed of the machine is even. Diamond saw blade knows that the force on the blade is even, and the consumption of the blade is even, so the automatic cutting machine is more conducive to extending the life of the saw blade. On the contrary, if it is a manual cutting machine, because the stone plate is pushed manually, the force on the cutting head of the saw blade is not even, and the consumption is not even, so it is not conducive to prolong the service life