How to effectively maintain the metal cutting saw blade?

- Dec 17, 2019-

How to effectively maintain the metal cutting saw blade?



A good soldier must have a good weapon. As the saying goes, "a hero is equipped with a treasured knife". Then a good electric saw with its saw blade can't be too bad. So when we use various metal cutting saw blades, we must think about how to maintain it, which will make it not be damaged so fast and can be used for us for a long time.


A good soldier must have a good weapon. As the saying goes, "a hero is equipped with a treasured knife". Then a good electric saw with its saw blade can't be too bad. So when we use various metal cutting saw blades, we must think about how to maintain it, which will make it not be damaged so fast and can be used for us for a long time.


Maitai saw blade expert simple analysis: how to effectively maintain metal cutting saw blade:


Metal cutting saw blade


1. The internal diameter correction and positioning hole processing of metal cutting saw blade must be carried out by the manufacturer. If the processing is not good, it will affect the use effect of the product and may cause danger. In principle, the hole enlargement shall not exceed the original hole diameter by 20 mm, so as to avoid affecting the balance of stress.


2. If the metal cutting saw blade is not used immediately, it shall be placed horizontally or hung up with the inner hole. Other articles or feet shall not be stacked on the horizontally placed saw blade, and attention shall be paid to moisture-proof and rust proof.


3. When the metal cutting saw blade is no longer sharp and the cutting surface is rough, it must be reground in time. Grinding can not change the original angle and destroy the dynamic balance.


Cutting blade of portable cutting machine


As long as the above metal cutting saw blade maintenance work can be done, it is almost.